1 / 2
Better 645 film holder for the EFH — zdjęcie 1
1 / 2

Better 645 film holder for the EFH

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Better 6x4.5 film scanning mask for the Essential Film Holder.

Ocena
0 / 5
Polubienia
2
Pobrania
25
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial

If you've got an Essential Film Holder you'll know the supplied 120 masks are all well oversized for a typical medium format frame size. This exposes a lot of the film rebate and means at the end of a strip you'll likely have one unsupported edge which is detrimental to film flatness. The excess light wreaks havoc on image contrast requiring more post processing and unless your negative is perfectly flat, it will likely reduce sharpness too. 

This mask has an aperture sized to fit the frame size produced by a Pentax 645N precisely, so 55x40mm. It has some bevelled edges to make life a little easier in loading film, but for non-flat negs you may need to pass a piece of paper through to help guide the end of the film into the channel on the opposite side of the aperture.

This model still requires the medium format spacer that comes with the EFH and can't be used on its own!

Make sure to print with ironing enabled or use a smooth build plate and flip the model to make sure there will be a smooth surface touching your film to avoid scratching your negatives! I recommend using a matt black or dark grey filament to minimise reflections and avoid introducing any colour casts.

You use this entirely at your own risk, please test with a scrap of film to make sure you're happy it won't damage your negatives!

Tagi