Passthrough spining top fidget toy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The core can be launched through the "launcher" (with some practice) or it can be locked with a nut for a larger top
- Ocena
- 4,333 / 5
- Polubienia
- 190
- Pobrania
- 750
- Wydruki
- 7
- Wyświetlenia
- 3234
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution
Prints without support. Tolerance are quite large to allow the core to go through with minimal friction. The “pin” is quite tight. Rimming the whole with a 7mm drill bit might help.
Prints without supports.
Fun toy to play with. When assembled it spins quite well.
If you seek the best spinning performances for the core by itself and take on the challenge of launching through the launcher, then printing the outer part of the core with 100% infill is a good idea. Easily done via a modifier:
FreeCAD model is included.