Phillips OneBlade Long-Reach Handle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Long-reach handle for grooming hard to reach places. Print-in-place, requires no assembly, fun use of compliant parts!
- Ocena
- 5 / 5
- Polubienia
- 107
- Pobrania
- 465
- Wydruki
- 3
- Wyświetlenia
- 2621
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Long-reach handle for the OneBlade that makes it easy to groom hard-to-reach places!
I've wanted something like this for a long time, the current Phillips design challenge was a good inspiration. Fun project, particularly designing the compliant spring and 90-degree coupling to make the power on/off functionality work without requiring any assembly.
This is designed to maximize use of the CoreOne build platform. If you have a smaller build platform, it's important to cut the file below the spring in the handle - you can attach the end of the handle using pegs or any other mechanism, but if you cut above that the model will not work well.
Recommended print settings:
- .4 mm nozzle
- .2 mm layer height
- 3 perimeters
- Supports painted on ONLY on the overhanging parts of the end where the OneBlade is held (see photo)
- Automatic support generation OFF, it will cause major issues in the moving parts
I designed with PLA but any rigid filament should work (more flexible materials may cause different behavior of the compliant parts).