1 / 9
18650 power HackRF PortaPack H4M Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a upgraded case designed for the HackRF PortaPack H4 & H4M With a replaceable 18650 Li-ion battery.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 793
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (8)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
This is the ultimate HackRF H4M case with many improvements:
- Designed for 3d printing, with larger tolerances than the original case (which was made for injection molding with very tight tolerances)
- Powered by a replaceable 18650 Li-ion cell
- Added EXT - MIC and ON - OFF text on the front and + and - signs at the back for battery polarity DO NOT CONNECT THE BATTERY BACKWARDS!!!
- Moved and improved the readability of existing text
- Added speaker holes
- Included a version without the two bottom clock SMA ports for the Clifford Heath variant
- And some other minor improvements
- Used higher poly count STL files
A standard version is also available here.
- What you will need:
18650 SMT Battery Holder preferably this one
- PH 2.0mm power cable
- A standard 18650 battery cell
- Soldering iron