BTT HDMI7 Free Standing Screen Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Free standing BTT HDMI7 setup, filled with concrete and lead shot to make the display heavier and feel more premium.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 200
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I have a RatRig vcore 3.1 machine with enclosure panels that I didn't want to drill into, so I designed a case that I could keep on my workbench with a long HDMI and USBC cable. Pattern in the bottom is for trapping concrete and lead shot when mixed together, it's not required but adds some heft and makes it feel more premium in the long run. Heat-set insert assembly with some various length M3 bolts coming from the bottom to close it up. Strain relief part is for using zip-ties for the cables, otherwise it's fairly easy to accidentally yank the hdmi and usb cable out of the display.
I took some shortcuts on the design in a few places as I wasn't interested in reprinting, but I have attached the F3D file if you're interested in making some changes for yourself.