Atlantis board game sail replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement part for old childrens board game “Atlantis” from “Schmidt Spiele”.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 193
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement part for old childrens board game “Atlantis” from “Schmidt Spiele”.
The sails of the boat are generally a bit weak. Now you can produce enough replacements for them so every boat can escape various deep sea creatures. (and your children won't complain about missing sails … )
Print settings:
- for best result use 0.1 mm layer height
- ironing could be nice, if you have the time …
- use a white filament - I used PolyMaker polyTerra arctic teal, because my white was out
(if you need the boat itself, let me know through comments and I will see what I can do)
additional notes
I'm interested in your feedback to improve my stuff! So give me likes, post makes, comment and rate the print to show others and me how well it goes.
If you post a make, let me know which filament you use.
If you want to support me by donating a coffee go to https://ko-fi.com/antimaterie I would really happy about it. The money will be invested in all stuff regarding 3d printing to give more and better quality models.
In general my Prints are not for commercial use, but if you a print farm owner and want to sell some of my stuff, please contact me.
Hope you enjoy my models.