Inflatable Pool Rim-Tube-Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for tubes (from a filter pump) to the rim of an inflatable pool (rim diameter about 18cm).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Share Alike
I needed to fix two hoses from a pool pump to my inflatable pool (that was not designed to work with a pump, thus, does not have connection ports at the wall).
This simple holder can be clipped onto the inflatable ring on top of the pool and hoses can be zip tied to it.
It is designed for a pool with a ~18cm diameter inflatable ring and a 4cm hose (diameter). For a smaller or larger inflatable ring diameter, just scale the object. The hose should work with a broad range of diameters as it gets zip tied to the holder anyways.
Printing
I printed in PETG, 4 wall loops and 15% gyroid infill. The part is designed to be printed WITHOUT supports.