1 / 3
T-handle for allen keys
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
T-handle for allen keys from 1.5-5mm to make use more comfortable
- Ocena
- 4,667 / 5
- Polubienia
- 440
- Pobrania
- 620
- Wydruki
- 9
- Wyświetlenia
- 3520
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (6)Wydruki i komentarze (Wydruki: 9) (Komentarze: 12)Remiksy (0)Kolekcje (538)Powiązane
I designed this t-handle for allen keys to make using the ball end more comfortable and allow for applying more torque.
The part shown in the photos was printed on a Mk3S in Prusament carmine red PETG. I recommend 25% gyroid infill and ~5 wall loops for strength.
Slicer settings: 0.2mm layer, 25% gyroid infill, 5 wall loops, printed standing up on the hex base without support on a textured plate.
