1 / 2
Black Rhino "Stadium" Flat Center Caps
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flat center caps for Black Rhino's "Stadium" wheels.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 703
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (13)Powiązane
When I purchased some new wheels I was disappointed to learn that they did not come with the flat center caps pictured in the online description. So I designed some really simple ones without any logos instead.
These are designed specifically for Black Rhino's “Stadium” wheel in the 19x8 size, and 5x114.30 bolt pattern. Part numbers;
- 1980SDM305114M76
- 1980SDM305114Z76
Whether they'll fit another wheel, I cannot say, but you can always print one and give it a shot.
Assorted Notes
- My sliced file is intended for PETG and a .4mm nozzle.
- I used Prusa's Dark Coffee Bronze PETG.
- The bronze filament would have been awesome if it would have worked off the printer, but it was a little too light. So I sanded, painted, and clear-coated mine to better match the dark bronze color of the wheels.
- I designed these to print face down, without supports, so that the face had the nicest surface. However, this isn't ideal for the snap tabs which are weak as a result. So be gentle when installing them, but don't worry, they're 3D printable and you can make more!