SCX6 - Castle Mamba Monster X 8S - Mounts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Castle Creations Mamba Monster X 8S for the SCX6.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 114
- Wydruki
- 0
- Wyświetlenia
- 831
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
A Castle Creations Mamba Monster X 8S for the SCX6. This is meant to match up with my receiver box (here) and be used with the new 3Brothers RC Black Jacket motors.
There's both a lengthwise (LW) and width wise (WW) mount; choose as you see fit.
You'll need the stock screws to complete; this is a friction fit; print at 101% if you find the initial print too tight.
Update (5/5/24) - Added a new a Castle Cobra 8 mount for those running the newest ESC.
Update (12/21/23) - Added a new more compact MMX8S Width-Wise version. This is best for those without a lot of space or are running longer motors.
Update (12/7/23) - Copied over a new MMX8S Length-Wise (LW) mount that fits the 860kV motor; along with a smaller MMX mount for those running that ESC.
Notes:
Turn on supports from the bed to get the best results. Push through from the top size to remove support material for the inset mounting holes.