Sci Fi Helmet (with tusks!)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my first try at a helmet, and I'm pretty proud of how it turned out.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 307
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Masks
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is my attempt at a sci fi helmet, a type of model that I've wanted to try my hand at for a while. Created in Fusion, this helmet should fit the average head, but I would recommend using it for display purposes (I'll print as soon as my repair parts arrive). Eventually I hope to cut it into easily printable parts, but the modeling is done. The helmet itself is kind of Sith-inspired, as most Sith have very unique masks. This was also inspired by several animals, evident in the tusks and reptilian spines on the top. Any advice is appreciated.
Note: Print the visor in a reflective or transparent filament.