Danvise Saltwater Jaw Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I had originally purchased a Danvise many years back and upgraded with the steel Saltwater Jaws offered by a 3rd…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 49
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
I had originally purchased a Danvise many years back and upgraded with the steel Saltwater Jaws offered by a 3rd party. It was nice, but pricy in comparison to the cost of the vise and added more metal to a nearly all composite vise. I liked this design here on Thingiverse but just needed a few tweaks. I've also included both Right and Left handed versions. The original here was setup as a Left, I preferred the right handed.
Remixed to fix a few issues I had with the original part and my particular Danvise. The nut slot was not deep enough, and as such the stock thumbscrew would not engage the threads. Also the arm that inserted into the vise was not flush at the bottom and sat proud by about 1.5mm.
Changes made: Sunk the nut slot another 2mm and shaved 1.5mm off the top of the inserted end. These changes gave a good positive engagement with the nut and stock thumb screw and had the insert flush in the vise again.
Print Settings
Printer Brand:
ELEGOO
Printer:
ELEGOO NEPTUNE 3 Plus
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
100% for max strength
Category: Tools