Lazy Susan ready 3x Modular Gaming Stand Tower
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you have a lot of controllers, you can mount this on the lazy susan of your choice for some utility
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 757
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
This remix is intended to build a rotating controller stand, centered around a lazy susan. It includes braces for the tower to keep it stable.
Before printing these additional parts, print some of the original model's pieces and make sure they fit. If they are too loose, you'll probably be unhappy. Whatever adjustments you make to get the original Modular Gaming Controller Stand to fit correctly, you'll likely also need to do to my additions.
Print one base, top, and as many mid-braces as you think you need. For my 3x3 configuration, one mid-brace was enough.
No Lazy Susan model is provided because there are a lot of them and it depends on your bearings. You will need to modify your favorite to suit.
The BaseBrace requires a hexagonal hole punched into the center of the lazy susan model you choose. In OpenSCAD, you can just difference() a cylinder with r=3.85, $fn=6.
The one I used was https://www.printables.com/model/847959-lazy-susan-fully-parametric
.scad sources are provided. Not the best organized or parameterized, but it's there. This will require you to copy the original .stl files into the same folder as they are imported and used for boolean operations.