Ryobi Battery - 2pk Caddy
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a battery caddy designed for 2 Ryobi batteries. The base and the handle body are original designs.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 270
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This build uses the excellent battery adapter base from this project:
https://www.printables.com/model/146289-ryobi-battery-to-bosch-tool-adapter
Specifically the ryobi_battery_adapter_base_for_bosch.stl file.
The base and the handle body are original designs. This was tested with 4AH batteries but larger ones should still work. This uses M3 hardware (heat inserts and 6 and 10 mm screws). You need to pay attention to the orientation of the adapter bases to ensure you install the heat inserts in the right places. I only use 4 of the holes in the adapter base to mount to the body. The batteries are held inverted from each other to accommodate the stick connector and keep the overall width of the handle body down.
In the images, the handles are rough as this version was printed in draft mode/high layer height with minimal support however, it's fully functional. A future revision will make it easier to understand the orientation and will improve the handle a bit.
This example was done in PLA but PETG or other less brittle material may be a better option if the caddy get's a lot of tough use. Recommend 6 walls and at least 4 top/bottom layers and 8% gyroid infill for the handle body.
Step files included for modification.