1 / 5
Caddx Ratel 2 Crash protection sleeve (TPU)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protection sock for FPV camera Ratel 2 - Save your lens from crashes and scratches!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 188
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Mounting holes are exposed so it can still fit into the mounting bracket. Be sure to print with TPU and enable supports (on build plate only) with 0.2mm Z gap. A bit tedious to fit the camera inside, its a tight fit. Don't be scared to pull the strap on the bottom to the side with a bit of force.