Travel case for Philips 7000 Series Trimmer (MG7715/65)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A strong and modular travel case designed for 7000 series of trimmer range from Philips.
- Ocena
- 4,667 / 5
- Polubienia
- 150
- Pobrania
- 369
- Wydruki
- 3
- Wyświetlenia
- 2627
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Travel Case - Philips 7000 Trimmer
Description
A simple, strong and easy to assemble travel case for 7000 Philips trimer (I used MG7715/65 to model) that can be modified for your preferences of the attachments you use the most. This case features a snap closure which keeps the lid closed securely.
(You may see some differences in the STL files uploaded and the pictures uploaded, don't worry the STL files are updated and improved. The print is V1.0)
Key Features
- Modular tray for attachment (Instructions Below)
- Strong construction
- Hole for charger pin to pass even when the case is closed
- Open/close box for easy access to charging cable
- Robust snap closure
- No support printing
- In tray attach and detach for accessories
- Open/close box - flip it for easy access and again if you want it secured.
- Tray holds accessories to assist attachment and detachment.
Tray Dimensions and clearances
The Slot for tray is 77mm X 141.25mm, with a 5mm fillet on all corners.
Dimensions in the image are of the tray not the slot for the tray, I kept a 0.2mm Tolerance.

The image below is the clearance for the tray shown through a Sectional view of the case.

Printer & Filament
Printer: Anycubic Kobra 2 Neo
Nozzle: 0.4mm
Slicer: Anycubic Slicer
Filaments:
Wol 3D - PLA PRO+ Plain White
Wol 3D - PLA PRO+ MarigoldOrange
Supports: Not required
Brim: Not Required
Print Instructions
This is a very simple print and doesn't require any special care. For reference the preferred print orientation is shown in image below.
The latch needs to be printed in a longitudinal orientation to get the optimal strength.



Assembly
Only the parts named Latch and Top Lid need to be glued for the functioning of the snap closure. Use 1 drop of super glue on the inner surface then slide the latch in to the dovetail joint.

Enjoy, Keep Creating!!
