FAB25 Lock Picking Set
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lockpicks and case for the FAB25 Lock Picking Workshop in Brno, Czechia
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 60
- Wydruki
- 1
- Wyświetlenia
- 455
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- GNU General Public License v3.0
A simple set of lockpicks and a case to hold them so they don't poke holes in things. Feel free to add your own decoration to the handles. Contains: hook, diamond rake, single wave rake, city rake, my favourite snake, and a torsion bar.
The lockpick SVG can be cut on a fibre laser such as the xTool F1 Ultra or ground by hand. Use a springy steel between 0.55mm and 0.65mm thick. It is not absolutely necessary to temper the steel afterwards, but it helps.
The edges of the picks will need to be smoothed off with fine carbide paper after cutting. Do not smooth the inside edges of the ends of the torsion bar as the rough edges give additional grip in the keyway.
The case prints without support on a Prusa Mk4. It is very snug, and you will need to work it back and forth a few times to loosen it off before use.
NOTE Please check your local laws on lock picking tools, don't pick locks that you do not have explicit permission to pick, and don't be an idiot.