1 / 9
Mario Question Block Coin Shooter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mario-style question block that shoots coins from the top when pressed.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 234
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (14)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (8)Powiązane
Mario-style question block that shoots coins from the top when pressed. Includes internal spring-loaded mechanism. Great for display or fun desktop use. Easy to print and assemble.
Supports required as needed.
Springs required:
Ø6mm x 0.7 wire x 20mm (latch/trigger)
Ø9mm x 0.8 wire x 40mm (launcher)
Assembly notes:
- Verify smooth movement of all sliding fits. Sand/file as needed.
- Lubricate latch on T-slot and drive pin contact surface.
- Insert the latch before adding the trigger and locking pin.
- Fully assemble the launch mechanism and set it to the firing position before installing it into the shell.
- Insert the launch pad and trigger button into the shell before adding the launch mechanism.
- Install two dovetails into one side of the shell, then install the other two into the opposite side of the launch mechanism.
- With all dovetails in place, insert the launch mechanism into the shell slightly offset, then work the spring mechanism and dovetails into position.
- Dovetails feature a snap-lock design and can be removed using a flathead screwdriver.