1 / 9
Creality K1/ K1C CFS Riser - CFS Add on for my Hood Design — zdjęcie 1
1 / 9

Creality K1/ K1C CFS Riser - CFS Add on for my Hood Design

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Add on to hold the CFS unit on top of the printer

Ocena
5 / 5
Polubienia
47
Pobrania
223
Wydruki
2
Wyświetlenia
2132
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is a Add on to my Vented hood which fits on top to hold the CFS unit if your upgrading your printer to use the CFS.  My Hood Link - https://www.printables.com/model/935341-creality-k1-k1c-riser-top-hood-with-vents-removabl

I remixed a great design to fit my hood. You can not use the factory clear lid with this.

Use standard voron heat inserts M3 x 4mm (L) x 5mm (D) and m3 screws

becarful of your tolerances if printing in ABS or the like as it shrinks and you may need to add allowances in your slicer (ive left a bit of clearance but just warning if your printer is not tuned etc)

You will need to route the PTFE tube in a different way than my original hood, but i have just done a hole in the back removable vent as Pictured

But theres a number of ways to bring the PTFE tube in and im looking at a few options, So will update this as i sort it and im looking at making a mount for the buffer so will add that as i sort that.

If ive forgotten something or you have Any question Just ask.