Mammotion Luba 2 H series side guard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Side Guards for Luba 2 5000H
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 185
- Wydruki
- 1
- Wyświetlenia
- 1489
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Remix of the popular side guard for the Mammotion Luba 2 that's compatible with the 5000H model.
Follow the instructions located in the original model for assembly and printing.
https://www.printables.com/model/882429-mammotion-luba-reinforced-side-protection/comments
Just use the sideskirt file here rather than the “Luba-Sideskirt_Right_v2.stl” from the original.
The side skirt was modified to fit the taller side guards of the H series, but it is still entirely compatible with the “Luba-Fender_Right_v2.stl” file from the original model.
In my experience, printing with regular PLA results in guards that are too brittle. I printed my final version (in black) out of PETG-CF with a 0.6mm nozzle, 20% infill, and 3 walls.
I have only tested this with my 2023 Luba 2 5000H. I have no way to confirm that it's compatible with the 1000H or 2000H models, but feel free to try it out and send feedback. If it fits, I'll update the description.
This also likely doesn't work with the 2025 models with the orange side guards, but again, if you have one feel free to test it out and let me know if it does.