1 / 3
Pavo 20 Pro Canopy for Walksnail Moonlight with M2 camera mount support. — zdjęcie 1
1 / 3

Pavo 20 Pro Canopy for Walksnail Moonlight with M2 camera mount support.

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Pavo 20 Pro drone custom canopy. Designed for Walksnail moonlight VTX, and M2 screw camera mount support.

Ocena
0 / 5
Polubienia
1
Pobrania
54
Wydruki
1
Wyświetlenia
526
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Public Domain

The best printing position is upright and slightly diagonal, just let the slicer figure out the best position :-)

Use supports, especially if you are printing with TPU. You will need loads of supports because the model is tall (upright), and the material being TPU, it will bend as it builds up taller. I slowed down the print speed from 500mm/s to 250mm/s.

Not the easiest print, but the result is great, kudos to the original designer!

 

Tagi