Recessed Rackmount for Behringer X Air XR18
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alternative and sturdy Rackmount with an Opening for Cables and enough recess to close the case lid.
- Ocena
- 5 / 5
- Polubienia
- 28
- Pobrania
- 388
- Wydruki
- 1
- Wyświetlenia
- 2093
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
I wanted to finally put my mixer into a light case rack. The original mount would be suitable for just that, but I plan on adding some wireless devices and found out that there was not enough clearance for xls plugs to be permanently plugged in and allowing the lid of the case to close. At last for my case of choice (Gator GR-6S).
I saw printable alternatives, but wasn't pleased with the angles, cable holes or mounting methods for my application. So here is another one. It is recessed by 15mm from the front of the rack rail and uses all four of the original countersunk screws from the rubber bumper endpieces the solo mixer would be equipped with.
Also, because for now I had free slots, I designed a panel that transitions from the recessed mixer to the front of the rack to leave no unpleasing gaps. Since my build plate was too small, I made a two part version with holes that are meant for M3 threads to be cut in in order to connect the two halfs.