Syma X25PRO/X25W landing leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Landing leg for drone Syma X25PRO or X25W - easy to print, no support needed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This is a landing leg for the drone Syma X25PRO or X25W. It was modeled based on original parts and is fully compatible with both versions - these drones share the same body.
If you lost or broke your original landing leg, you can replace it with this model.
This part is designed to be 3D printable without supports.
This part has been tested in PLA, but PETG or other more resistant materials may be better. Use many perimeters and dense infill.
Warning!
This is still only a 3D printed part and it may break during a hard landing. Use at your own risk!