Star Wars R93 Refractor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model of the R93 Refractor, used by the Rokana Raiders in Star Wars: Outlaws with print-in-place wings and keel
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 323
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
About the Ship
The R93 Refractor appeared in Star Wars: Outlaws: A Pirate's Fortune.
The R93 Refractor is armed with missles and light and heavy cannons. Its wings rotate to switch between flight (wings vertical) and combat mode (wings horizontal). For landing, the wings fold upwards and the keel at the bottom retracts into the hull.
It was used by the Rokana Raiders, a pirate group operating out of the Khepi System.
About this Model
The wings can rotate independently 360° around the ship and the keel can extend and rectract. Everything is print-in-place.
| Wingspan | Length | Body Width | Body Height |
|---|---|---|---|
| 106mm | 87.3mm | 37mm | 31.7mm |
The model has a hole compatible with a big pin and base. Vertical wings require 3 pins.
Print Instructions
Printed at 0.15mm layer height. A different layer height might make separating the wings a lot more difficult or even impossible.
Requires organic supports. I recommend using a 2-layer raft.
After printing, separate the different segments of the wing-hinges by inserting the tip of a small knife into the gap. Do the same for the keel.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#