Shark WandVac Rug Comb Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's a vacuum nozzle adapter with comb teeth for carpet and rugs.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 162
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was disappointed that Shark did not include a comb type adapter with the WandVac we bought. This adapter for the WandVac was designed for rugs and carpet where organic debris (leaves, etc.) might be more prone to get trapped into the fibers. The combs in this design help dislodge that debris and also helps eliminates vacuum lock on lighter rugs. It’s a simple press fit into the WandVac.
Requires less than 30g of filament (typically less than $0.70 USD in filament). PLA works fine. You should print this with a 3 or 4mm brim. The OAL is 100mm, but you can shorten it in your slicer on the Z-Axis for a faster print.
Like all WandVac adapters, you should remove it before returning the vac to the charging station to make sure the charging contacts align.
Also please to remember to clean the filter on your Wandvac monthly, or as soon as you find the vacuum performance degrading.