Card shuffler carry / storage box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a carry / storage box I made for the Card Shuffler by Josh-3D.
- Ocena
- 0 / 5
- Polubienia
- 32
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 1446
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a carry / storage box I made for the Card Shuffler by Josh-3D.
Shuffler, This box fits the tall shuffler, so it will work for both the tall and standard shuffler.
I suggest printing the box using PETG or better for durability.
I designed the latches to be printed out of TPU 95-A for durability. If you print them using PETG or other “hard” filaments, it will be very stiff to latch and may need a little work to get them right.
Print the box using 4 walls and 15% infill.
Print the latches using TPU with 2 walls, 20% infill.
Print the handle with 4 walls and 20% infill.
This box takes a long time to print, so use a good filament.
Hardware required along with affiliate links.
6 M3 x 45mm button or cap head screws
2 M5 x 20mm button or cap head screws
4 M5 washers
2 M5 nuts
M3 Hardware https://amzn.to/4kCJ2o8
M5 Hardware https://amzn.to/43eznOK
Links to models I used.
For the handle, I used this. https://makerworld.com/en/models/65461-handle#profileId-68829
For the box, I used this. https://makerworld.com/en/models/788747-super-customizable-rugged-box-in-openscad#profileId-998975
The shuffler. https://makerworld.com/en/models/497170-card-shuffler#profileId-411575