1 / 6
POCKET PAWNS : Single Extruder Travel Chess/Checkers Set — zdjęcie 1
1 / 6

POCKET PAWNS : Single Extruder Travel Chess/Checkers Set

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple and Compact Chess and Checkers Set For On The Go!

Ocena
0 / 5
Polubienia
28
Pobrania
30
Wydruki
0
Wyświetlenia
491
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Public Domain

This portable chess and checkers set is designed to fit into any standard paper towel tube and can be scaled for different sizes. 

It features a simple coin design that is compact, light, stackable, and packable all in the size of a paper towel tube.

You can use the top side of the pieces to play chess or simply flip the pieces over to play checkers. 

 

PRINTING

This model can be printed with one extruder in different colors using the color print feature in prusa slicer.

In Prusa Slicer, use the layer color print to set each color change on the piece. It should look something like this.

If printed with the settings below, there will be a swap at layer 14 and 27.

 

You will need the following pieces for half of the game board.

Pawns x8

Rook x2

Knight x2

Bishop x2

King x1

Queen x1

Then print these over again in a different color for the other half of the board.

I recommend printing all your pawns for one side at once and then all the other pieces for that side next, instead of printing each piece individually as shown the the included gcodes

Make sure you print the bottom section of the pieces in a different color for each half of the board to make sure you can flip the pieces over for checkers!!

 

PRINT SETTINGS  (For prusa MK4S)

.25mm Structural

15% infill

Generic PLA

No brim 

No supports

 

Game Board

There is an included image of the game board I used but you can use any that you already have or can print one off the internet. I recommend printing the entire board at 14" by 14" to make the squares big enough, or you can scale down the size of each piece. 

Tagi