1 / 3
Ender5 Aluminum Bed Support
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These bed supports make the bed much more rigid (to a surprising degree) than the completely printed bed supports I…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 40
- Wydruki
- 0
- Wyświetlenia
- 502
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (11)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (8)Powiązane
These bed supports make the bed much more rigid (to a surprising degree) than the completely printed bed supports I was using previously!
I've also included a .STEP file of everything to make editing it easier.
3/4in Angle Aluminum Ender5 Bed Supports
Update_12-09-19: Added STL for 4mm thick bed carriage plates. It's named "Support_A-4mmPlate.stl"
You'll need:
- 3/4in angle aluminum extrusion; 2x 217.5mm lengths (I just cut mine to 217mm even)
- M5 screws & nuts x8
- Print one of every STL file here
Instructions:
- Cut two 217.5mm lengths of the 3/4in angle aluminum. I just scored the aluminum using a right angle ruler & file, then cut it using a dremel cut-off blade
- Press fit the angle aluminum into the printed pieces
- Press fit the M5 nuts into recesses onSupport_C1 &Support_C2
- Snuggly fitSupport_A into the bed carriage frame, then carefully slide the supportsSupport_B1 &Support_B2 up and into place over the printer's rod bushings.
- PositionSupport_B1 &Support_B2 so the bottom edges are flush with the printer's rod bushings, then secureSupport_C1 &Support_C2 in place using M5 screws.
Print Settings
Printer Brand:
Creality
Printer:
Ender 5
Rafts:
Doesn't Matter
Supports:
No
Resolution:
.25mm
Infill:
30%
Filament: 3dxtech PC/ASA Grey
Category: 3D Printer Parts