Battery and tester storage box insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made to convert the rugged pinecil XL case into a battery storage case
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 153
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
General:
A nice battery storage case using the shell of the Rugged Pinecil XL case
Why I designed this:
I designed this to give my son a little more independence. He loves being able to change out his own batteries and test them on his own.
Printing notes:
Layer height: .2
Recommended Material: PLA or better
Supports: None
Infill: 15% Gyroid or triangle
Walls: 2
Other Modifiers: Print as oriented
I printed from PLA on Qidi plus4 at .2 layer height with 15% gyroid infill.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out:
https://fabtechmfg.square.site/