Holster for Caldwell Wind Wizard 2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes it easier to carry your Caldwell wind wizard while out and about.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
General:
It's a simple holster for the Caldwell Wind Wizard 2, Wind meter
Why I designed this:
I designed this while I was working on a school project where we needed to take wind measurements and then quickly have both hands free.
Printing notes:
Layer height: .2 or finer
Recommended Material: PLA or better
Supports: Bed only, snug
Infill: 15% Gyroid or rectilinear
Walls: 2-3
Other Modifiers: Print opening down
I printed from PETG on Neptune 4 pro at .2 layer height with 15% rectilinear infill.
Cautions and updates:
Support isn't strictly necessary, but will improve quality of the radius
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out: