Replacement pedal for kids electric scooter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement rubber pedal for kids electric scooter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
General:
A replacement pedal for small electric scooter
Why I designed this:
I designed this to replace the rubber pedal that my son managed to lose
Printing notes:
Layer height: .15
Recommended Material: TPU
Supports: Painted organic
Infill: 15% Gyroid or rectilinear
Walls: 3
Other Modifiers: Print opening down
I printed from Overture TPU on FLsun T1Pro at .15 layer height with 15% gyroid infill.
Other notes:
Supports will be difficult to remove because it's TPU. A heat gun will help a lot to clean up any stringers.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out:
https://fabtechmfg.square.site/