1 / 1
Seal Set for setting metal roof seals — zdjęcie 1

Seal Set for setting metal roof seals

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a replacement for the tool supplied by Leak Stoppers Mine was missing.

Ocena
0 / 5
Polubienia
0
Pobrania
16
Wydruki
0
Wyświetlenia
145
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a replacement for the tool supplied by Leak Stoppers ( https://leak-stopper.com/ ).
Mine was missing thanks to the package coming open. But from what I see all it was is a wood dowel with a stepped hole drilled in it.


I created this to replace it and made it easier to hold.
I wanted get started before it rains again and did not want to wait for a replacement tool. This works well and I've already installed over 200 seals.


If you wonder what these are for, they are little seals made in a circle with a foil protected butyl rubber adhesive. If you have a metal barn roof after a few years the little rubber gaskets under the screws will fail and start to leak. I tightened any screws that were loose and replaced quite a few that could not be tightened and placed a seal over each screw to protect it from weather.
I was lucky to have a roof that matches the color of the gutters sold by Loews so I was able to buy a can of paint and made them match.


Print the stl as shown. I printed mine in PETG 1.6mm walls top and bottom. 40% cubic infill and 7% support touching buildplate.


If you are doing a project like this be careful!
Most metal roofs are slippery.
But the end result is worth it.