1 / 2
Tyre Iron Puck Stay
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A puck-shaped stay for holding a tyre iron in place in the trunk of a car. Designed for 20mm diameter Velcro pads
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 67
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple puck-shaped stay for holding a tyre iron in place in the trunk of a car. Designed for using five 20mm diameter Velcro pads. There are also small indentations on the sides, so a bungee cord, etc., can be used to secure tyre iron to the puck.
Other notes:
- My tyre iron has 16mm diameter bars, which the puck is designed for
- I recommend using normal standard supports for the Velcro pad pockets (and in this case to use PLA for super-easy removal) so the ceiling of the pockets get a smooth surface for the glue on the Velcro pads to hold onto.
- I also recommend using fuzzy skin (in my case 0.4/0.2) to increase the friction between the puck and the tyre iron.