1 / 2
No. 2: Pulleys and Crossed Belt - 507 Mechanical Movements — zdjęcie 1
1 / 2

No. 2: Pulleys and Crossed Belt - 507 Mechanical Movements

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The mechanism No. 2 from the book "507 Mechanical Movements"

Ocena
0 / 5
Polubienia
14
Pobrania
20
Wydruki
0
Wyświetlenia
158
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Engineering
Licencja
Creative Commons — Attribution — Noncommercial

All the parts are designed so that no post-processing is needed (removing supports, sanding...) and no external parts are needed (except for the belts).

Happy printing

 

This mechanism differs from No. 1 in the substitution of a crossed belt for the open one. In this case the direction of rotation of the pulleys is reversed. By arranging three pulleys, side by side, upon the shaft to be driven, the middle one fast and the other two loose upon it, and using both an open and a crossed belt, the direction of the said shaft is enabled to be reversed without stopping or reversing the driver. One belt will always run on the fast pulley, and the other on one of the loose pulleys. The shaft will be driven in one direction or the other, according as the open or crossed belt is on the fast pulley.

Other mechanisms from this same book

The official website of this book

 

I would really appreciate if you leave a like to this model so I can continue making many more 3D models like this one.

Tagi