1 / 5
MK3S Light upgrade
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple light to upgrade your MK3S printer
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hi there!
This time I bring you a easy two armed light upgrade for your 3D printer.
The file consists of 4 main part
- Arm seperated to 2 smaller part
- Holder and arm - could be printed as one for better load-bearing capacity
- Holder and arm - could be printed as one for better load-bearing capacity
- Connector for light
- This part can be replaced
- You can use double-sided tape
- I used magnetic parts which came with my light
- Bar - this is part that connects previous parts
- Feel free to experiment with its size
- v1 file is more free in movement
- v2 file is more locked and suitable for having the light in place
- Light - you have to buy one from the internet, I used this one:
- Feel free to use a different one, that suits your need, but beware the fact that it may need your own styl of connecting to connector in point 2)
- https://www.alza.cz/xtech-nabijeci-led-svitidlo-l-1005-20-cm-cerne-d8570456.htmo=7
Hope you enjoy this print!
Feel free experiment with it!