(Version 2) Storage for Slay the Spire Standard Edition + Playmats & Coin pouch

Version 2 of my inserts for Slay the Spire standard edition! The main purpose of these inserts is to allow you to store the playmats in the standard edition box along with the rest of the game pieces. This version also offers the following improvements over the previous one.

• Player Boxes.  All tokens, cards, minis, other game pieces associated with each character are now stored together for ease of set-up and game-saving.
• Coin Pouch.  If you also have the metal coins and pouch, there is a convenient place to store them too!
• Fully 3D-Printed.  My previous version of the inserts required a laser-cut wood panel. Now, all you need is a 3D printer to make all the parts.
• Thick Sleeve Compatible.  All trays tested to fit up to 120μm thick sleeves (i.e. standard Dragon Shield or similar brand sleeves). Perfect if you plan to upgrade the stock sleeves!

Printing Suggestions

To make everything fit, I had to make tolerances very tight. I strongly recommend using a 0.4mm nozzle and 0.2mm layer height or smaller! Otherwise certain walls may be too thin to print properly.

Additionally, note that one file, STS_Relic_Holder-tray.stl, requires supports due to overhang on the edges.

How to Save the Game

To save the game with the player boxes, do the following.

1. Place your card rewards in the large card tray on the west side.
2. Place your rare rewards in the removable tray in the middle.
3. Place removed starter cards face up in the starter deck slot, under the rare rewards tray.
4. Place your deck face down in the starter deck slot (all that matters is that you can differentiate these from your removed cards).
5. Place coins in the southeast corner space under the small tray with the character icon.
6. Place character-specific tokens (poison, shivs, miracles, orbs) in the small tray above the coins. Also keep the 5-strength token and four 1-strength tokens here on Ironclad.
7. Place potions, relics, and boss relics in the northeast space. You may need to move the token tray to access this.
8. Place the character mini above the relics so that the base of the mini fits into the slot on the north side of the box.
9. If playing with ascensions, place the grey cube in the slot labeled “-0” between relics and rare rewards. Place a red cube in a spot bellow the grey cube to mark your missing health after healing at the end of the act (i.e. directly below the grey cube if you are at full health, and further for each health point missing).
10. Place your character board face down on top of the box.

Storage Tips

1. See above video and pictures for storage arrangement. Note the the relic holder (STS_Relic_Holder.stl) is oriented perpendicular to card trays in order to make space for playmats.
2. Put the token tray (STS_Relic_Holder-tray.stl) above the relics/potions when storing the game. When playing the game, put this tray in the tray which holds the red cubes (STS_Cube_Token_Tray.stl). During play, make sure the 5 gold and 5 block tokens are on the far side from the red cubes, so that they are accessible.
3. If you have the metal coins, place the coin bag in the red cube tray (STS_Cube_Token_Tray.stl) during storage.