Cordless drill driver holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mounted cordless drill driver holder
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 58
- Wydruki
- 0
- Wyświetlenia
- 287
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I made this holder to hang my Makita cordless screwdrivers on the wall. However, the holder is designed so that screwdrivers of other brands also fit — I have tried this with my Bosch and AEG screwdrivers.
Installation
The holder is screwed to the wall for a strong and secure fixing. Adjust the mounting angle to suit your screwdriver as best as possible. Use a flat-head screw that fits countersunk holes with a diameter of 3.5–4 mm and a length of 20–25 mm. However, this may vary depending on the type of wall.
Printing and print settings
For best results, print the holder lying on its back. The parts in the model file are oriented in the best direction for printing. Use PLA with a layer height of 0.2 mm or less and a nozzle width of 0.4 mm or less for printing. Ensure a wall thickness of at least three lines and an infill of 25%. A support structure is not required.