10-inch rack mount for PoE switch TL-SG108PE V2 with adjacent PSU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
10-inch homelab rack mount design for TP-SG108PE V2 allows flush mount of ethernet ports and storage of power brick
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 36
- Wydruki
- 1
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
10-inch rack mount for TP-SG108PE V2 switch https://www.tp-link.com/us/support/download/tl-sg108pe/v2/
Remixed version of "10" Switch Rack Mount (TL-SG108PE)". That was suitable for V3 or V5 versions of this switch, but I have a V2 switch (labeled Ver. 2.6)
For this model, I created a rough model of the V2 switch (and power supply) to confirm that the general layout would still work (and fit in 1U height). Can confirm switch drops right into a printed model.
for the “half crosses” used in this design's screw wall mounts, I iteratively arrived at something that fit snugly so that the switch enclosure would rest on it with little movement.
The mount positioning and enclosure dimensions also seem to be the same as the V1 (ver. 1.1) TL-SG108 unmanaged non-PoE switch. It uses a much smaller power supply (wall wart, not power brick), so an alternate or trimmed down version of this model would be what you'd want to use for one of those
Source: tp-link_SG108PE
Useful related models: