Spring-Loaded Strong Multi-Joint Hinge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multi-joint hinge for vertically opening doors. A gas spring may hold the door open and closed.
- Ocena
- 5 / 5
- Polubienia
- 31
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 714
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Strong multi-joint hinge. Uses M4 screws and nuts. Do not forget to pause the print and insert the nuts. The hinge has a support for a gas spring in order to hold a vertically opening door open and also to hold it closed. I personally use it for my 5mm acryl glass printer enclosure door with a 60 N gas spring on each side (Vinabo 2 Pieces Gas Springs, 60N Pneumatic).
I printed with PETG, 5 perimeters and 0.25 mm layers. Actually the hinge takes the load easily while the 750 x 500 x 5 mm acryl glass appears to be choosen too thin to take the full spring force. Next time I would rather choose 6 to 8 mm acryl glass. Please feel free to comment…