1 / 4
1967 Mustang Console Anti-Rattle Seat Belt Cups — zdjęcie 1
1 / 4

1967 Mustang Console Anti-Rattle Seat Belt Cups

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Anti-rattle inserts for the seat belt cups in a 1967 Mustang console.

Ocena
0 / 5
Polubienia
3
Pobrania
27
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

1967 Mustang floor consoles included cups for storing the seat belt buckle when not in use. These cups had a rubber like anti-rattle insert that typically either degrades or is missing. My console still has the original inserts in decent condition. I decided to attempt recreating them as both an exercise and to accompany another project I'm developing. This model matches up with the original fairly closely, but a few minor details differ. I may tweak it over time to match up even more closely with the original.

I printed a prototype using PLA, which is very different from the material originally used for these inserts. This was done mainly to be able to print the prototype quickly. I then printed it using TPU which still differs from, but more closely approximates, the original material for these inserts. If not using TPU and using a hard plastic, I would recommend using something like ASA that is UV resistant and can handle the interior temperature of a car in the hot sun. Other than that, I used my printer's (Creality K1) default settings. If printing TPU, you may want to experiment with the settings for seam placement if you don't want a visible seam.