RK6006 - Power Supply Case/Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lab power supply case for RK6006 module
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 390
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- GNU General Public License v3.0
BOM:
1x 24V Led Power Supply (~200mm in length; max 205mm)
example: https://www.aliexpress.com/item/1005004381821944.html
10x M3x4x5 Heat Inserts
1x IEC 60320 C14 male power inlet
1x SPST KCD1 Power Switch
4x M3 Rubber foot
example: https://www.aliexpress.com/item/4000206171617.html
2x Black 4mm Banana Socket
2x Red 4mm Banana Socket
1x Green 4mm Banana Socket
About
Comparable with RK6006; DPS5005; DPS3005 and DPS3003 modules.
I bought cheap Led Power supply from temu for ~10 euros and decided to finally build case for RK6006 that had been collecting dust.
One potentially big flaw is that if you use similar power supply as I did you will be limited to ~21V on output. I did add 2 holes behind the case for 2 banana plugs which will enable you to power it from external power supply (turn off internal one first!).
You might need to trim Banana plugs for + and - depending on their length due to space constraints, I connected green one to the earth.
Decorative panels need to be glued on or with Acetone if you use ABS or ASA (PLA is not recommended).