1 / 4
Catamaran Trampoline Lacing Post
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lacing post/stud for mounting a catamaran trampoline to the hull - or anything else you need to run a rope around.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Heavy-duty lacing posts designed to secure a trampoline on a catamaran. These mushroom-shaped fittings are built to handle significant lateral loads and are intended for use with M5 countersunk machine screws.
These have been on the boat for three seasons in an area with pretty strong UV through the summer months. They're showing a little wear (see the photo), but no problem functionally.
Features
- Mushroom profile for trampoline lacing
- Fits M5 countersunk screws
- Compact, low-profile design
- Print at 100% infill to handle rope tension loads
Print Settings
- Material: PETG
- Layer Height: 0.15 mm
- Infill: 100%
- Supports: Not required
- Brim: Optional
- Orientation: As per the model orientation (i.e. upside-down)