Gorenest LED lamp from Doom Eternal
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The two types of Gorenests (besides the golden gorenest) reimagined as a LED strip powered colour changeable lamp
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 60
- Wydruki
- 0
- Wyświetlenia
- 374
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Print instructions:
For the Balls, walls needed to be thick to print properly so a transparent filament like natural PETG is recommended with a low layer height, part cooling fans ON, and speed set as high as the machine can handle (I recommend doing a max volumetric flow rate calibration for PETG first)
The Sac is the opposite, needs to be printed with big layers, slow speeds, part cooling fans OFF (or just download the 3mf)
The Organ and the Gorenests need tree support, the Balls need normal support
Post processing instructions:
I used this app controlled programmable LED strip: https://www.aliexpress.com/item/1005006646615659.html?spm=a2g0o.order_list.order_list_main.29.2c7e1802RFLQgE
I recommend sanding the Sac with high grit sandpaper and wiping it with mineral oil (I use baby oil, works well, smells nice) for maximum transparency, and scuffing the Ball with low grit sandpaper and NO baby oil for maximum opacity.
The LED strip goes in through the hole in the bottom, threaded through the small hole in the pole then it is wrapped around it. The model has a small cutout at the bottom backside for the cable.
The Organ goes in the Organ Holder, which goes in the Sac, which goes in the Gorenest from the inside. The ball goes on top of the pole.
If you find a way to implement a magnetic levitation kit or a led bulb, please let me know! :)
I couldn't figure out how to make them fit without having to make the model way too big.