Extended table-top mount racks for YAMSS (YET ANOTHER MODULAR STORAGE SYSTEM)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Different length, pre-cut and pre-oriented panels to mount your storage to your desk.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Hello!
I really like this system, however, it only has mounts to hang it from the top.
But why not mount it to the table?
So, here you are. I made these with exact dimensions.
In the files you have mounting plates from three to eight boxes.
Version with 3 studs should print on any Creality-sized printer (220mm bed).
Version with 4 studs should print on any printer with the bed size of 256mm. For example, your Bambu Lab A1 should do it.
For the 4 stud variant I also included shortened version. While it won't fit the width perfectly, it should be compatible with 220mm beds.
All other variants come in two editions. One is for full-length as one piece. These should be stronger, but I don't think a lot of people have 400mm bed printers available.
The other variant is split (fun fact: with exactly the same dimensions dove tail mount as main system) to two pieces. Print both A and B parts and connect them afterwards. I would strongly advise to glue them together.
For assembly you may need to hammer them in place, since I made tolerances as tight as possible.
Thanks for checking out!