Dimmer Switch Faceplate for Airstream Basecamp 20X (and maybe other airstreams)

This allows mounting of dimmer switches to control the lights of an Airstream basecamp.  The interior LED lights are too bright for many times.

The Dimmers - Acegoo 12V Dimmer

Assembly:  (Sorry i didn't take pix)

• Remove faceplate (a knife behind and it pops off)
• Unscrew the switch mounting carrier
• Label the wires - the top wire from each switch is the output, the lower is the 12V input
• Unplug the wires so u can work on it
• Pop the switches out of the carrier - a thin knife or screwdriver helps by wedging in from behind the switches.
• Trim away the long sides of the rectangular switch holders.  you will need to remove some more meat at the base to allow the dimmer to fit.
• Superglue the printed faceplate - i snapped on the existing faceplate first to help center the printed piece.
• These dimmers require a ground connection.  There's a white wire feeding to the stove into which u can vampire.   Best to check you have 12V between the white wire and one of the infeed 12V wires.
• Cut off the push on terminals of the wires to the switch u are going to .  I used Wago connectors to connect everything up.