SSUPD Meshelicious Tophat for 140mm fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This tophat is designed to place a 140x25mm fan on top of the SSUPD Meshlicious to help with the extraction of hot air
- Ocena
- 0 / 5
- Polubienia
- 17
- Pobrania
- 195
- Wydruki
- 0
- Wyświetlenia
- 891
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
This tophat is designed to place a 140x25mm fan on top of the case to help with the extraction of hot air. There are two prepared variants, one to print the thing in one piece (Meshelicious_Tophat_v2) and there is one that is printed in two pieces (parted_1 and parted_2) for printers with beds that are less than 255mm wide. These require four 4x36mm rods of some kind to align and reinforce the two halves. Both halves have a thin wall added to keep them from warping during printing, these have to be cut away before gluing the halves together.
Four of each of these clips are used to attach the tophat to the case and respectively to attach the top mesh to the tophat:
https://www.printables.com/model/955216-ssupd-meshlicious-male-case-clip
https://www.printables.com/model/91246-ssupd-meshlicious-clip
Tree or hybrid supports are required.