1 / 4
Sovol SV08 Upgraded Bed Buildplate Corners — zdjęcie 1
1 / 4

Sovol SV08 Upgraded Bed Buildplate Corners

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Cheaper (in filament) way to hold your buildplate on for your SV08 3D Printed Bed Frame Upgrade

Ocena
0 / 5
Polubienia
18
Pobrania
47
Wydruki
0
Wyświetlenia
417
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

These pieces have been created as a replacement for the “Sovol SV08 3D Printer – 3D Printed Bed Frame Upgrade” optional frame by Nadir https://www.printables.com/model/1217294-sovol-sv08-3d-printer-3d-printed-bed-frame-upgrade

Have you bought your SV08 heated bed upgrade and now think, damn that frame takes a lot of filament, but I want to align my buildplate?
Wait no more!

These clips will snap around the back corner posts of your upgraded bed and will keep your buildplates well aligned to your bed.

Recommended Printing Settings

Just about anything will do, use filament that can withstand the heat you want to push your bed to (so ASA, ABS, PC, Nylon), make sure it's not too brittle because they snap fit around the posts, so I won't recommend CF or GF filaments.
As for walls, 2 will suffice, it's pretty thin at the clip and back.
Recommended nozzle is 0.4mm.

These 2 pieces were printed in just over 15 grams of ASA:

 

 

 

Tagi