SARB-15-esque bodykit for Fury Pro X
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bodykit for the Zuru X-Shot Fury Pro X
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 1008
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
(apologies for the assault on your eyes that is the paintjob in the example photo)
This is a bodykit for the Fury Pro X that allow the blaster to roughly mimic a very short version of SARB-15 bullpup kit. Not intended to be a PERFECT replication by any means, the idea is to give the Fury X a stock arrangement that gives it a more proper look than what the slide normally necessitates.
The main stock piece is extremely lazily assembled by just mashing parts together in Orcaslicer, using negative shapes to create the cavities into which the slide moves. The mod as a whole, however, utilizes remixes of several other creations. It is my hope that someone will pick this up and remix into a more proper design to make up for my complete lack of true 3D modelling skills.
The stock unit is very, VERY large, and may not fit on many printer beds. I was able to print it on a 220x220x240 build volume by cutting it in half and gluing the separate pieces together when done.
The main stock is built on a remix of Gemeneye's Torrent long stock: https://www.printables.com/model/1019868-nerf-pro-torrent-stock-long-length
WeiZheng Huang's N-strike stock adapter was remixed to make it more comfortable around the wrist: https://www.printables.com/model/1241222-fury-x-n-strike-stock-adapter-x-shot-pro
And WeiZheng Huang's bolt prime was remixed to give the blaster a straight-pull bolt-action prime that clears the body: https://www.printables.com/model/1242864-x-shot-pro-fury-x-bolt-action-mod
The stock adapter will require the same hardware as WeiZheng Huang's original version - 2 m4x30 nuts and bolts, plus a recommended but not fully needed m3x50 for the rear of the adapter.
You will also need the spring adapters included with Gemeneye's Long Stock, and the pins included with WeiZheng Huang's bolt prime - as I did not alter these pieces I did not feel comfortable including them.
Hope some of you will enjoy this and maybe even fix the issues caused by my shortcomings.
