Bins for Harbor Freight 20 Bin Portable Storage Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Additional variations to Armourcrafts excellent HF bins.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
I found the original bins that Armourcraft designed to print and fit the best but I wanted a few more variations so I redesigned some keeping the features that made his the best.
I printed these out of petg with 4 walls and 6 bottom/top layers. Very sturdy bins, maybe better than what came with the organizers.
The long bin with dividers is to be paired with the small filler bin to fit correctly. because of the layout the lid will not close on the non notched versions of these to bins unless you use a sharp wood chisel to remove the ridges on the bottom side of the lid in the bottom corner
Conversely you can print the notched version and they should fit. I notched mine with a pair of sprue cutters and chisel as i didn't want to reprint. They are directional as they only need notched on the handle end of the organizer to work correctly.
Long bins is going to need at least 310mm bed.
I included a sectional long bin that uses small pegs of filament to align when gluing together but it probably needs developed further.