1 / 2
CAN EBB36 mount for the Orbiter V2 with a filament sensor — zdjęcie 1
1 / 2

CAN EBB36 mount for the Orbiter V2 with a filament sensor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Custom CAN EBB36 mount for Orbiter V2 with filament sensor, made for Mercury One.1

Ocena
0 / 5
Polubienia
9
Pobrania
43
Wydruki
0
Wyświetlenia
351
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

I couldn't find a model for the CAN EBB36 mount on the Orbiter V2 with a filament sensor that doesn't use hex stand-offs and at the same time provides free access to the filament sensor connector, so I designed a simple mount myself. I decided to use heat inserts in the Voron size (M3x4x5). This mount was created as part of converting an Ender 5 to a ZeroG MERCURY ONE.1 and using the E34M1 Toolhead.
Printed from ABS on Ender 5, nozzle 0.4, layer height 0.16, brim 2 mm.